Sold as 1.2ct lots (Approximately) 4 stones in each lot Purchased directly from the mine in Montana! These sapphires exhibit natural light blue,  l...

Sold as 1 ct lots (Approximately 11 stones per caret at this size.)   Purchased directly from the mine in Montana! These sapphires exhibit natural ...

Amazingly Clean and Large Light lemon color Old Stock

Beautiful old stock Clean polished facets 7x7 mm square

Amazingly Clean and Large Light lemon color Old Stock

Amazingly Clean and Large Light lemon color Old Stock

 Beautiful clean smokey quartz Large Briolette Cut pears  28 x20

Beautiful 2.5mm faceted round garnet Priced per stone Garnet, the traditional red birthstone of January. It is created from iron and magnesium to ...

Beautiful Hessonite garne stones Also known as the “cinnamon stone,” hessonite is the yellow-orange to reddish orange variety of grossular garnet...

Prasiolite is a green variety of quartz. The two components of its name are derived from Greek roots meaning leek-green stone. The color is produce...

These stones are not calibrated. however, they are close to the advertised  size. Example a 4mm stone may be 3.9 mm, 4.2 mm, or somewhere close. 

These stones are not calibrated. however, they are close to the advertised  size. Example a 4mm stone may be 3.9 mm, 4.2 mm, or somewhere close. 

These black Onxy cabochon are hand cut to a beautiful matte finish, providing an elegant contrast to polished gold. Add these subtle stones to a ti...

These 14x7mm Mother of pearl are vintage old stock shell cabochons from a mussels shell.

Old Stock Labradorite  Amazing quality Available in 6mm 8mm 9mm 10mm

Vintage Kingman Turquoise cabochons 5mm round

Made in Poland Baltic Amber is the fossilized resin from prehistoric forests of colossal Kauri pine trees. 

Beautiful Hessonite garnet cabochons Also known as the “cinnamon stone,” hessonite is the yellow-orange to reddish orange variety of grossular gar...

Lustrous +/- 5mm round amethyst cabochons, handpicked from a vintage estate, perfect for setting! These are not calibrated 

This product was inspired  by a post on Metalsmith Society where a pair of actual brass knuckles were used as a mandrel holder. The Lion Punch Forg...

These nesting bench trays come in a set of four, making them a great addition to your bench organizing routine. They are made from either PLA or PE...

This functional and classy hammer rack stores a wide range of hammer sizes with a simple flat construction .Ttese are constructed  from aluminum an...

The Plier Rack from Lion Punch Forge has undergone numerous changes during its nearly year-long development process. These improvements have result...

The Bur stand from Lion Punch Forge includes holders for standard 3/32 inch and larger 1/8 inch jewelers burs, allowing for a compact and versatile...

Digital STL File for printing your own set of boxes plus the deeper dish ! Now that quality and reliable 3D printers are available to all of us we ...

This functional and classy bracket was design to hold most bracelet mandrels or your heat gun while not in use.  These are constructed  from alumin...

  These organizers with a slide top are ideal for storing needle files and other tools or components that require additional length. Please note th...

  The QC graver stand by Lion Punch Forge offers 40 slots for organizing a variety of graver shapes. Designed by an engraver for fellow engravers, ...

Compressed, natural hardwood charcoal block has a compact, tight-knit surface that reflects heat from the flame back into the jewelry piece, making...

Popular honeycomb design holds pins to keep work in place while soldering. Made of a non-asbestos ceramic the board is very lightweight and reflect...

AquiFlux is the best flux available. It is a self-pickling flux, meaning it actually cleans the metal of small contaminants and oils, allowing sold...

This non-asbestos soldering pad is durable, smooth and heat-reflective. Fairly hard so as not to flake or crumble and highly flame-resistant and no...

  Crafted with precision, these copper tongs feature a finer tip than typical commercial pickle tongs. Each piece is laser cut and enhanced with a ...

Strong, durable steel construction for wire forming Precision tip alignment for accuracy Radiused, non-marring edges to protect wire Delicate pre...

2175 -Maxi-Shear Flush Cutter An extremely durable and versatile wire cutter featuring Xuron's Micro-Shear Flush cutting action. Tough enough for h...

The newest addition to the Wubbers Pliers - the ProLine Series. Engineered for comfort and exceptional control, the ProLine series has real-feel er...

A favorite design among wire workers and wire wrappers, these medium bail making pliers are good for a number of uses including making large even c...

This product was inspired  by a post on Metalsmith Society where a pair of actual brass knuckles were used as a mandrel holder. The Lion Punch Forg...

These nesting bench trays come in a set of four, making them a great addition to your bench organizing routine. They are made from either PLA or PE...

This functional and classy hammer rack stores a wide range of hammer sizes with a simple flat construction .Ttese are constructed  from aluminum an...

Set-it is a moldable thermoplastic work holder that allows for setting stones with two hands! So many smiths struggle with getting good leverage an...

The Natural Bur and saw blade lubricant. *Come is 1 oz cardboard push tubes *Limited edition metal tin (harder consistency) Bur and blade balm is a...

Compressed, natural hardwood charcoal block has a compact, tight-knit surface that reflects heat from the flame back into the jewelry piece, making...

AquiFlux is the best flux available. It is a self-pickling flux, meaning it actually cleans the metal of small contaminants and oils, allowing sold...

Popular honeycomb design holds pins to keep work in place while soldering. Made of a non-asbestos ceramic the board is very lightweight and reflect...

This non-asbestos soldering pad is durable, smooth and heat-reflective. Fairly hard so as not to flake or crumble and highly flame-resistant and no...

Our deluxe cotton rouge cloths offers great value. It is impregnated with the finest quality red rouge on one side while the other side is left pla...

  Improve your cutting experience with Antilope German saw blades. These high-quality blades offer more cuts and a longer lifespan due to their goo...

A very small horizontal notch in the tip of these cross-locking tweezers allows you to securely hold even the finest of wire when soldering or shap...

Formulated for extended shelf life, versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous. May...

These adorable Hummingbirds in flight are light and sweet!  Sold Individually as Right OR Left facing. Measurements: L- 15.8mm W- 18.4mm H- 2mm Cas...

These are so versatile!! Use them to hold on to whatever you can dream up! Charms, stones, elements, use as a clasp, the ideas are endless!! I crea...

Beautifully Organic Cast Twigs with tiny buds running up and down the twig. A new chapter about to bloom! Available in Sterling Silver and Brass. S...

 These are hand carved, adorable, Angel Fish facing left and right as mates!! Measurements: 11.6 L x 12.2 W x 2 Hmm Cast in .925 Sterling Silver fo...

This gorgeous Snake Skin casting may be used as a ring shank or design element in your creations! It was cast using real snake skin. the texture an...

 Little Sea Shell This small Sea Shell has distinct personality! The tiny ridges were captured so well giving it depth and detail! Measuremen...

These are very light weight Crescent Moons in two Styles! One has a cute Star hanging from above and the other is plain. These are flat backs. Meas...

Unique Succulent Flower casting to use in your jewelry designs. Measurements: L- 10.9mm W- 11.8mm H- 6.1mm Cast in .925 Sterling Silver for use in ...

I cast this from an actual  Starfish - it's size is perfect for so many applications! Measurements: L- 14.65mm W- 13.8mm H- 2.75mm Cast in .925 Ste...

Castings for Jewelry Design; Cast in .925 Sterling silver these Hand Carved Scorpions have great detail all around! Measurements: L- 24.75mm W- 16m...

A Daniel Urrea Legacy stamp, this one is a true beauty. Design is 10 mm tall aproximately.

With three different widths in place, this mountain ring band has the potential to make delicate rings and larger more masculine rings. It includes...

4 inches long, this plate has two sizes of ring bands, with a raised and a recessed image of running horses.

Inspired by Art Nouveau design, this Lotis stamp wines in a semi circle and could be used for earrings, bezel designs, etc.  12 mm approximately 

These hummingbirds are ready to adorn your jewelry. The medium is approximately 8 mm and the small is approximately 6 mm.